USAutomatic automatic swing gate openers and slide gate openers


return to accessories page
	7 Day Programmable Timer - PN 550015 The optional 7 day timer can be used to open the gate at a preset time and if the auto close feature of the gate opener is being used the gate can then close automatically at a preset time. The timer is supplied with a 3 wire harness that easily wires to the control board.	SOLAR FRIENDLY!
	SPECS	PROGRAMMING
	1ma Standby Current Draw 1ma Latch Current Draw Easy to program: Daily, Weekly, Alternating Days or Weekend. 24 events per day Time is displayed in 24 hour format Summer mode for Daylight savings and Random mode 3 wire harness supplied for easy wiring Temperature range 20 C to +70 C Designed for use with USAutomatic control boards. Connect wires from timer to control board J2 connector as follows: Red wire connect to J2 pin 1 Black wire connect to J2 pin 2 Blue wire connect to J2 pin 9	NOTE: 24 hour format. Example - 8 am is displayed as 8:00 and 8:30 pm is displayed 20:30 The timer has the ability to program up to 24 separate events per day. The instructions below describe the simple setting of just one event per day 01. If more than 1 event needs to be programmed pressing the + or - key while “01 on” is flashing will scroll to the other events such as 02, 03 etc. Setting clock 1. Press Y 2. Use + or - to scroll menu to CLOCK: Press Y to select clock programming 3. Hour is flashing > Use + or - to change hour 4. Press Y when correct 5. Minute is flashing > Use + or - to change minute 6. Press Y 7. Day is flashing > Use + or - to change day 8. Press Y 9. Time and Date are set Set Program 1. Press the Y button 2. Use + or - to scroll menu to PROG mode: Press Y to enter program mode 3. “01 on” should be flashing: Press Y to enter “01 on” program mode 4. Use + or – key to set hour: Press the Y key 5. Use + or – key to set minutes: Press the Y key 6. Use + or – key to set the day to execute program: Press the Y key 7. “01 on” will be flashing: Press the + key 8. “01 off” should be flashing: Press the Y key to enter the “01 off” program mode 9. Use + or – key to set hour: Press the Y key 10. Use + or – key to enter the minutes: Press the Y key 11. Use the + or – key to set the day to execute program: Press the Y key 12. Press the N key to exit program mode or wait 5 seconds Manual ON or OFF To manually turn timer ON or OFF press the “N” button Display will switch from “PROG” to “ALWAYS ON” and then to “ALWAYS OFF” To exit manual mode press the “N” button until the display goes back to “PROG” Random mode If the timer is set to “Random” then all programming will be ignored and the gate will open randomly. Reset Button Press and hold to reset all functions Download pdf version of programming instructions here
	By using solar-friendly accessories, you can design and install a complete system utilizing standard 6 watt solar panel. USAutomatic continues to work with accessories and control board design to offer methods and products to reduce battery drain.